Elektral ThruScan Instrukcja Użytkownika Pobierz pdf (Strona 50)

* I want to operate my WTMD through a standard telephone line using the Remote

Control SRC-SCADASoftware. How should I make the connection?

You may operate and/or make the adjustments of your WTMD from anywhere around the world

using a

standard telephone line as cable or satellite connection (GSM or THURAYA). The accessory

necessary for this process is a modified modem and a special connection cable prepared by the

factory. One end of the connection cable consists of a 25 dSUB (See 7.1.2 for modem) and the

other end is in the shape of a standard telephone connector (for ThruScan see 3.7).

If the control of more than one WTMDs would be made by means of this line than there should be

a connection as shown below or each connection cable taken from the WTMD separately should be

brought where the modem will be used.

It is explained in details in Section 10.2 how to make a connection between SRC-SCADA software

and ThruScan.

For MODEM execution;

* I want to synchronise my WTMDs and use the Remote Control SRC-SCADA Software

at the same time. How should I make a connection

The same connector (SYNC/SRC SOCKET) socket is used for SRC-SCADA Remote Control and

Synchronized operation.(See 3.7) The terminals/wires(5-6) should be used from the “synchronizing

operation cable” and has to be connected to computer or the modem. This process should be

performed by a technical staff. This cable is provided as an accessory.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 56 57

Brak uwag

Elektral ThruScan Instrukcja Użytkownika Strona 50